Best LED parking lot lights is a lighting term in electric and electronics world that is most commonly used to describe in detail the outdoor lighting which is usually mounted on a pole and mostly located in parking lots, driveways and hallways. Best LED parking lot lights are a type of outdoor lighting solution which is commonly used to illuminate areas intended for motor vehicles and pedestrians, with the most common indication that the lights are pole mounted.

It is most relevant and not uncommon to see multiple lighting fixtures mounted on the same support with the specific mounting methods can vary greatly. Good lighting not only keeps you track of potential threats but also gives you a sense of security. Instead of feeling like you’re filming a horror movie, lighting allows you to walk to the car comfortably.

Why People use LEDs in the parking lot of lights?

LED’s have several advantages over other light sources. They are the most energy-efficient light source on the market and the longest lasting as well Up to 50 000 hrs. This translates into real energy savings.

The average LED bulb will pay for itself in less than two years by electrical savings alone. LED’s are solid-state lighting components. They have no moving or fragile parts. This makes them extremely durable and adds to the lifetime of the product. LED also produces beautiful light other energy-saving light sources cannot do this.

Why LED parking lot lights rather than CFL?

LED parking lot lights are 30-50% more efficient than CFL (compact fluorescent) bulbs. The quality of light from CFL bulbs is not aesthetically pleasing. CFL bulbs contain Mercury, and if not correctly disposed of can cause harm to the environment. Because they are so fragile and prone to break the Mercury, they include also poses a health risk to the people using them.

CFL bulbs have a lifespan of fewer than 10,000 hrs. At the same time, LED lights to last up to 50,000 hrs. CFL Bulbs also emit harmful UV radiation and something called “dirty electricity”. Both have been linked to numerous health problems.

What does 50,000 RRS mean?

The life span of an LED parking lot lights is vastly more prolonged than that of incandescent, fluorescent or HID lamp sources. Although the LED parking lot lights never really burns out, product life span is measured by lumen depreciation. The Illuminating Engineering Society’s (IES) current standard for calculating the life of an LED parking lot light as the point at which the LED parking lot light reaches 30 per cent lumen depreciation.

Remember, a 50,000-hour rating is not equivalent to lamp life rating. LED parking lot lights life is rated where it has reached 30 per cent lumen depreciation. At 50,000 hours, an LED would still be operating, but at a decreased lumen output.

What is 50,000 hrs?

5 hours a day for 27 years

10 hours a day for 13.5 years

24 hours a day for 5.7 years

Environmental Benefits

ENERGY SAVING

The environment will benefit from a reduction in the amount of CO2 emitted for every kilowatt of energy saved since the primary source of energy is the burning of fossil fuel and thus the generation of CO2. Every mW-hr of electricity saved will reduce CO2 emissions by 1 ton. CO2 emissions are a crucial reason for the partial destruction of the ozone layer and the onset of global warming.

WASTE SAVING

One LED parking lot light can last as long as 50 conventional incandescent light bulbs. This is an actual savings of waste.

CONSUMPTION

LED parking lot lights consume 80-90% less energy when compared to the equivalent incandescent light bulb.

How many lumens do I need for a parking lot?

Mounting height of parking lights

Installation heights for parking area lights can range from twelve feet to 20 feet, but in some scenarios can reach very high heights up to 35 feet. The distance between the lights of the parking area depends on the peak of the fixture, the higher the luminaire, the fewer the posts needed to cushion the equivalent area.

How to install LED parking lot lights?

Lighting is an important safety feature in parking lots. Properly designed and installed lighting techniques give you lighting that deters thieves and offers a level of visibility that allows a person or a closed-loop digital camera to observe the action. Accurate preparation is vital because rearranging the lights in a parking area is difficult and expensive. The installation procedure also requires several procedures, some of which require an experienced technician. Many of the light installation practices are done before the parking floor is installed.

Plan the placement of the light posts

Approach a spot on padded posts inside the parking area. All parking areas must be illuminated with at least two weak poles. This stops the dark shadow sectors that can develop inside the car away from one tender resource, according to the Smart Crime Web pages.

Install underground wires

Setup the underground wires or conduits to electrically support each hollow post. Obey building codes for expert electrical services. These cables return to a potential power source, which is often found inside the building.

Lay the foundation for the light post.

Build the foundation for your lamp post-installation. Based on the type of lamppost used, this would entail creating a concrete pier or a large superstructure extending upward with the ground. Anchor bolts are inserted into the highest quality concrete to secure the metal posts in place.

Mount the lighting poles

Install the light poles on your own base. This usually requires a small crane or forklift to set the pole upright and transfer it to the muse. Secure the post in place by inserting nuts and washers into the anchor bolts. This and all the following simple steps will be performed after the parking area is covered. Connect the light chain with the pole to the cables installed in step 2. A certified electrician often performs this step

LEAVE A REPLY

Please enter your comment!
Please enter your name here