Reverse osmosis water systems are effective and reliable in providing you with clean water. The water system is fairly easy to maintain, but you need to know some basic steps that you can take to clean it to eliminate scale and bacteria build-up. To clean your reverse osmosis water system, you can do it by following the steps below.
How To Clean Your Home Water Filter System?
When the water supply system in your home is hard, you may not experience several issues related to cleaning it. However, it is recommended that you clean your water system at least once a year to prevent the build-up of scales and clogs. You can get more info here about how you can clean your home water filter system. The process is quite simple and easy to follow.
It is crucial to follow the instructions on the system’s manual when cleaning it. You can also follow the steps below.
- Clean your hands to prevent transmission of bacteria to the system
- Fill a bucket with sanitizing solution and warm water
- Make sure the water supply is shut
- Disconnect all appliances to the water system
- Depressurize the water system by opening any faucets
- Take out the pre-filters and reverse osmosis membrane
- Clean the housing of the water system using a sponge and warm water with sanitizing solution
- Use the sanitizer to clean the entire system and make sure that all debris is removed
- Ensure that nothing remains inside the water filter system
- Turn the water system on and make sure that there are no leaks on it. If there are leaks, you should fix them.
- Let the tank fill up and allow the bleaching to take place
- Flush the water tank at least twice to make sure that there is no trace of any sanitizer odor. If there is still an odor lingering, you can flush the system once again and make sure that it is completely clean.
- When the system is clean, depressurize it by turning off the water supply.
- You can reinstall all of the water filters if you are certain that they are still in good working condition.
- If you notice that the filter is damaged, you can consider replacing it instead of waiting for the system to break down.
- After replacing the filter, turn the water on and leave the system to flush for about two minutes until there is no longer any spluttering from the faucet.
- Let the tank fill by turning off the faucet. However, you must allow it to drain at least twice before starting to use the water for various household purposes. The aim is to ensure that the entire water system is completely clean before you start to drink it.
- When you are satisfied that the entire system is clean, then you can reconnect all of the appliances and it will be ready for use.
Clean The Reverse Osmosis Membrane
You should clean the filter components, especially the semi-permeable RO membrane since it accumulates dirt over time. When the filter is badly clogged, you can replace it and the process is very easy. The cleaning procedure usually depends on the model of the water system so you should refer to the manual for details. You should also use the right chemical solutions to clean the membrane.
Step-by-step Guide To Clean The RO Tank
When you have cleaned the entire water system, it is also crucial to clean the reverse osmosis tank to get rid of unwanted elements that can affect the taste of the water. Just follow the simple steps below.
- Shut off the entire water supply system and depressurize the RO system.
- Bypass any filter
- Add ½ tablespoon of hydrogen peroxide to the tube of the water system.
- Avoid spilling the contents, then reconnect the tube to the RO system.
- Open the valve of the tank and turn on the water supply while making sure that the faucet is off.
- Let the tank fill and allow the bleach to sit for a few hours to kill the bacteria.
- Turn on the RO faucet to ensure that the tank is completely drained to finish the cleaning process. You can repeat the process until the system is clear of any smell.
Now that you have mastered the skill of cleaning your home water filter system, you should constantly check it to ensure that it is always free of debris. It is a better idea to clean the filter system than replacing it since it can be expensive.